Issue 2.0
SV9100 Networking Manual 4-35
Using a Multiline Terminal with a call in progress (Open Numbering Plan):
1. Press Transfer, and receive internal dial tone. The call is placed on
Non-Exclusive Hold.
2. Dial the trunk Access Code (normally 8).
3. Dial the Office Code number.
4. Dial the distant K-CCIS station number where the call is to be transferred.
5. Wait for the ringback tone.
6. Hang up.
- OR -
1. When the party answers, announce the transfer.
2. Restore the handset (transfer is completed).
SERVICE CONDITIONS
General:
A UNIVERGE SV9100 station can receive a K-CCIS transferred call as a
camp-on call if allowed by Class of Service.
Restrictions:
Trunk-to-Trunk Transfer must be allowed in Program 14-01-13 (Trunk-to-Trunk
Transfer Yes/No Selection).
A blind transfer across a K-CCIS link cannot be completed until ringback tone is
received at the transferring station.
RELATED FEATURE LIST
Link Reconnect – K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
To Next Page
Loading...
