Issue 2.0
4-68 Features and Specifications
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
24-01-01 System Options for Hold –
Hold Recall Time
0~64800 seconds
Default is 90
A call on Hold recalls to the extension that placed
the call on hold after this time expires.
24-01-03 System Options for Hold –
Exclusive Hold Recall Time
0~64800 seconds
Default is 90
A call left on Exclusive Hold recalls to the extension
that placed it on hold after this time expires.
20-29-01 Timer Class for Extensions
– Day/Night Mode 1~8,
Class Number
0~15
0 = Not Assigned
Default is 0
Assign Timer Class (0~16) to each extension for
night mode. Virtual extension numbers are
included.
20-30-01 Timer Class for Trunks –
Day/Night Mode 1~8, Class
Number
0~15, #,
0 = Not Assigned
Default is 0
Assign Timer Class (0~16) to each trunk for night
mode.
20-31-01~23 Timer Class Timer
Assignment
Refer to Flexible
Timeouts in the
UNIVERGE SV9100
Features and
Specifications Manual for
more Flexible Time
details.
Assign times. These timers are referred when a
class is set to any number from 1 to 16 in PRG
20-29-01/20-30-01.
To Next Page
Loading...
