Issue 2.0
SV9100 Networking Manual 4-75
RELATED FEATURE LIST
Voice Calls – K-CCIS
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
11-16-03 Single Digit Service code
Setup – Switching of Voice/
Signal Call
Default is 1 Customize the one-digit Service Code used when a
busy or ring back signal is heard.
11-12-06 Service Code Setup (for
Service Access) –
Switching of Voice Call and
Signal Call
Default is 712 Toggle an ICM call between Handsfree
Answerback or Forced Intercom Ringing for
outgoing Intercom Calls.
20-08-10 Class of Service Options
(Outgoing Call service) –
Signal/Voice Call
0 = Off
1 = On
Default is 1
Turn Off or On the ability to force Handsfree
Answerback or Forced Intercom Ringing for
outgoing Intercom Call on/off.
20-08-11 Class of Service Options
(Outgoing Call service) –
Protect for the Call Mode
Switching from Caller
(Internal Call)
0 = Off
1 = On
Default is 0
When extension is set for ICM calls, enable this
option to prevent callers from changing to voice
announce mode.
To Next Page
Loading...
