Issue 2.0
SV9100 Networking Manual 4-77
Call Transfer – All Calls - K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/Item
No.
Description/
Selection
Assigned Data Comments
15-01-02
Basic Extension Data Setup –
Outgoing Trunk Line Preference
0 = Off
1 = On
Default is 0
If enabled, the extension user gets
trunk dial tone when the handset is
lifted.
20-06-01
Class of Service for Extensions 1 ~ 15
Default: Ext.101 is in Class
15. All others are in Class 1.
Assign a Class of Service to an
extension
20-08-09
Class of Service Options
(Outgoing Call Service) – Hotline/
Extension Ringdown
0 = Off
1 = On
Default is 0
Turn Off or On Ringdown Extension
for extensions with this COS.
20-08-19
Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
0 = Off
1 = On
Default is 0
When Hotline is programmed and 20-
08-19 is turned ON (1), the user can
press the speaker button and the
Hotline destination is dialed.
21-01-09
System Options for Outgoing Calls
– Ringdown Extension Timer
(Hotline Start)
0~64800 seconds
Default is 0
A Ringdown extension automatically
calls its programmed destination after
this time.
21-11-01
Extension Ringdown (Hotline)
Assignment – Hotline Destination
Number
Maximum 24 digits
(0~9,
, #, Pause, Hook
Flash, and @(code to wait
for answer supervision)
Default is No Setting
Define the Hotline Destination number
for each extension number.
To Next Page
Loading...
