Issue 2.0
SV9100 Networking Manual 4-81
When Connecting a SV9100 to a NEAX PBX, Link reconnect needs to be
turned off in the PBX to the SV9100.
RELATED FEATURE LIST
Call Forwarding – All Calls – K-CCIS
Call Forwarding – Busy/No Answer – K-CCIS
Call Transfer – All Calls – K-CCIS
Multiple Call Forwarding – All Calls – K-CCIS
Multiple Call Forwarding – Busy/No Answer – K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
50-06-01 CCIS Feature Availability –
Link Reconnect
0 = Not Available
1 = Available
Default is 1
Enable Link Reconnect.
21-01-03 System Options for
Outgoing Calls – Trunk
Interdigit Time (External)
0 = Disabled
1~64800 seconds
Default is 10
The system waits for this time to expire before
placing the call (Call time starts after this time
expires).
To Next Page
Loading...
