NEC Univerge SV9100 - Page 167

Issue 2.0
4-88 Features and Specifications
To set Call Forward – Busy/No Answer - K-CCIS from a Multiline Telephone (Open
Numbering Plan):
1. Press the Call Forward – Busy/No Answer ON/OFF key.
2. Dial 1 to set.
3. Dial the trunk Access Code (normally 8).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 744 (default), then dial 1 to set.
3. Dial the trunk Access Code (normally 8).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
To cancel Call Forward – Busy/No Answer – K-CCIS from a Multiline Telephone:
1. Press Call Forward – Busy/No Answer On/Off key.
2. Dial 0 to cancel.
3. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 744 (default), then Dial 0 to cancel.
3. Restore handset or press Speaker.
To set for any station for Attendant Positions only (Closed Numbering Plan):
1. Lift the handset or press Speaker.
2. Dial the Call Forward Busy/No Answer for any Extension to Destination
Service Code (default: 793).
3. Dial 1 (Set).
4. Dial the extension number to be forwarded and then the destination number.
5. Press Speaker or hang up.