Issue 2.0
4-108 Features and Specifications
During Voice Call, the ICM Key is flashing (Red).
Restrictions:
The calling party must wait for at least one ring back before Voice Call is
attempted.
After the calling party changes ring back to Voice Call, it cannot be changed
back to tone.
Voice Call cannot be set as the initial call across K-CCIS.
Group Call Pick Up is not allowed to retrieve voice calls over K-CCIS.
Single Line terminals can be used to originate a Voice Call Over K-CCIS.
However, they are not allowed to receive a voice call.
RELATED FEATURE LIST
Station-to-Station Calling – K-CCIS
Handsfree Answerback – K-CCIS
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
11-12-06 Service Code Setup (for
Service Access) –Switching
Voice Call and Signal Call
Default is 712
Assigns the access code used to toggle ICM call
between Handsfree Answerback and Forced
Intercom Ringing for Outgoing Intercom calls.
To Next Page
Loading...
