NEC Univerge SV9100 - Page 287

Issue 2.0
SV9100 Networking Manual 4-23
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into
the GCD-CP10 blade.
Conditions
 The System must be reset in order for these changes to take affect.
Feature Cross Reference
 Voice Over Internet Protocol (VoIP)
Program 10 : System Configuration Setup
10-13 : In-DHCP Server Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
DHCP Server
Mode
0 = Disable
1 = Enable
0
Enable/Disable the built-in
DHCP Server.
02
Lease Time
Days 0~255
0 day
Lease Time of the IP address to
a client.
Hour 0~23
0 hour
 Press Transfer to increment
to the next setting data.
Minutes 0~59
30 minutes
05
Last DHCP Data
0 = Disable
1 = Enable
1
If 10-13-01 is enabled, Enable/
Disable DHCP resource.