NEC Univerge SV9100 - Page 483

Issue 2.0
9-16 IP Single Line Telephone (SIP)
84-19-06
SIP Extension CODEC
Information Basic Setup –
G.711 Jitter Buffer (max)
Define G.711 Jitter
Buffer maximum
accepted value.
0~300ms
Default is 80
84-19-07
SIP Extension CODEC
Information Basic Setup –
Number of G.729 Audio
Frames
Define the G.729 audio
Frame Size.
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
Default is 2
84-19-08
SIP Extension CODEC
Information Basic Setup –
G.729 Voice Activity
Detection Mode
Enable/Disable Voice
Activity Detection for
G.729.
0 = Disable
1 = Enable
Default is 0
84-19-09
SIP Extension CODEC
Information Basic Setup –
G.729 Jitter Buffer (min)
Define G.711 Jitter
Buffer minimum
accepted value.
0~300ms
Default is 20
84-19-10
SIP Extension CODEC
Information Basic Setup –
G.729 Jitter Buffer
(average)
Define G.729 Jitter
Buffer setting.
0~300ms
Default is 40
84-19-11
SIP Extension CODEC
Information Basic Setup –
G.729 Jitter Buffer (max)
Define G.729 Jitter
Buffer maximum
accepted value.
0~300ms
Default is 80
84-19-17
SIP Extension CODEC
Information Basic Setup –
Jitter Buffer Mode
Define the Jitter Buffer
mode – supported
Static or Immediate.
1 = Static
2 = Not Used
3 = Self Adjusting
Default is 3
84-19-18
SIP Extension CODEC
Information Basic Setup –VAD
Threshold
Define the VAD
Threshold.
0~30
Default is 20
84-19-28
SIP Extension CODEC
Information Basic Setup –
Audio Capability Priority
Define Audio capability
priority.
0 = G.711_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
Default is 0
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3