NEC Univerge SV9100 - Page 543

Issue 2.0
10-56 SV9100 NetLink
SECTION 22 USING SOFTKEYS FOR PROGRAMMING
Each UNIVERGE SV9100 display telephone provides interactive Softkeys for
intuitive feature access. The options for these keys automatically change depending
on where you are in the system programming. Press the Softkey located below the
option you want, and the display changes accordingly.
Press the VOLUME  or VOLUME  to scroll between the menus.
SECTION 23 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
When using a display telephone in programming mode, various Softkey options are
displayed. These keys allow you to easily select, scan, or move through the
programs.
_
Program Mode
Base Service OP1 OP2
   
_
Program Mode
CCIS Hard Mtnance
   
Softkey Display Prompts
If you press this
Softkey . . .
The system will. . .
back Go back one step in the program display.
You can press VOLUME
 or VOLUME  to scroll forward or
backward through a list of programs.

Scroll down through the available programs.

Scroll up through the available programs.
select Select the currently displayed program.

Move the cursor to the left.

Move the cursor to the right.
-1
Move back through the available program options.
+1
Move forward through the available program options.