Issue 2.0
SV9100 Networking Manual 10-85
Description
Use Program 90-58 : Restore Recovery Data to select the recovery data stored in
the flash memory of the GCD-CP10. After this command is executed, the system
restarts automatically.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-58 : Restore Recovery Data
Level:
IN
Input Data
Data ID 1~5
Item
No.
Item Input Data
01
Restore Recovery Data
[Restore & Reset?] : Dial 1+ press Transfer
(Press Transfer to cancel.)
To Next Page
Loading...
