Issue 2.0
SV9100 Networking Manual 4-11
To set Call Forward – All Calls – K-CCIS from a Multiline Telephone (Open
Numbering Plan):
1. Press the Call Forward – All ON/OFF key.
2. Dial 1 to set.
3. Dial the trunk Access Code (normally 9).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 741 (default), then 1 to set.
3. Dial the trunk Access Code (normally 0).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
To cancel Call Forward – All Calls – K-CCIS from a Multiline Telephone:
1. Press Call Forward – All ON/OFF key.
2. Dial 0 to cancel.
3. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 741(default), then dial 0.
3. Restore the handset or press Speaker.
SERVICE CONDITIONS
General:
Any station or Call Arrival (CAR) key can be set for Call Forwarding – All
Calls – K-CCIS.
Restrictions:
Call Forward – Off-Premise must be allowed in PRG 20-11-12 (Class of Service
External Call Forward) to set call forwarding to a remote K-CCIS station
To Next Page
Loading...
