NETGEAR ProSAFE SRX5308 - Page 106

Security Mode Configuration Commands
106
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Step 2 Format remark {N | Y {qos_type {IP-Precedence | DSCP} {qos_value
<number>}}}
qos_priority {Default | High | Medium-high | Medium | Low}
Mode security-config [qosProfile]
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
remark Y or N Specifies whether or not packets are
remarked. If you select Y, you also need to
issue the qos_type keyword to specify
the traffic classification method and the
qos_value keyword to specify the
associated value.
qos_type IP-Precedence or DSCP Specifies the traffic classification method:
• IP-Precedence. A legacy method that
sets the priority in the ToS byte of an IP
header. You need to issue the
qos_value keyword to specify the IP
precedence value.
• DSCP. A method that sets the
Differentiated Services Code Point
(DSCP) in the Differentiated Services
(DS) field (which is the same as the ToS
byte) of an IP header. You need to issue
the qos_value keyword to specify the
DSCP value.
qos_value number There are two options:
• If the qos_type keyword is set to
IP-Precedence, the IP precedence
value, from 0 through 7. Packets are
remarked with this value.
• If the qos_type keyword is set to DSCP,
the DSCP value, from 1 through 63.
Packets are remarked with this value.