Utility Commands
323
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
util restore_factory_defaults
This command restores the VPN firewall to factory default settings. It takes about 3 minutes
for the VPN firewall to come back up.
Diagnostic Commands
util dns_lookup
This command looks up the IP address of a domain name.
SRX5308>
util dns_lookup netgear.com
Server: 66.80.130.23
Address 1: 66.80.130.23 ns1.megapath.net
Name: netgear.com
Address 1: 206.16.44.90
util ping
This command pings an IP address with 56 data bytes and displays the ping information.
SRX5308>
util ping 10.136.216.82
PING 10.136.216.82 (10.136.216.82): 56 data bytes
64 bytes from 10.136.216.82: seq=0 ttl=48 time=69.168 ms
64 bytes from 10.136.216.82: seq=1 ttl=48 time=112.606 ms
64 bytes from 10.136.216.82: seq=2 ttl=48 time=46.531 ms
64 bytes from 10.136.216.82: seq=3 ttl=48 time=49.804 ms
64 bytes from 10.136.216.82: seq=4 ttl=48 time=51.247 ms
--- 10.136.216.82 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 46.531/65.871/112.606 ms
Format util restore_factory_defaults
Mode util
Format util dns_lookup <domain name>
Mode util
Format util ping <ipaddress>
Mode util
To Next Page
Loading...
