NETGEAR ProSAFE SRX5308 - Address Filter and IP;MAC Binding Commands

Security Mode Configuration Commands
168
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security firewall advanced algs
This command configures Session Initiation Protocol (SIP) support for the application level
gateway (ALG). After you have issued the security firewall advanced algs
command, you enter the security-config [firewall-alg] mode, and then you can enable or
disable SIP support.
Command example:
FVS318N> security firewall advanced algs
security-config[firewall-alg]> Sip N
security-config[firewall-alg]> save
Related show command: show security firewall advanced algs
Address Filter and IP/MAC Binding Commands
security address_filter mac_filter configure
This command configures the source MAC address filter. After you have issued the
security address_filter mac_filter configure command, you enter the
security-config [mac-filter] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format security firewall advanced algs
Mode security
Step 2 Format sip {Y | N}
Mode security-config [firewall-alg]
Keyword Associated Keyword
to Select
Description
Sip Y or N Enables or disables SIP for the ALG.
Step 1 Format security address_filter mac_filter configure
Mode security
Step 2 Format enable {N | Y {policy {Permit-And-Block-Rest |
Block-And-Permit-Rest}}
Mode security-config [mac-filter]