NETGEAR ProSAFE SRX5308 - SSL VPN Resource Commands

VPN Mode Configuration Commands
252
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Related show command: show vpn sslvpn route
vpn sslvpn route delete <row id>
This command deletes a client route by specifying its row ID.
Related show command: show vpn sslvpn route
SSL VPN Resource Commands
vpn sslvpn resource add
This command adds a new resource. After you have issued the vpn sslvpn resource
add command, you enter the vpn-config [sslvpn-resource-settings] mode, and then you can
configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Format vpn sslvpn route delete <row id>
Mode vpn
Step 1 Format vpn sslvpn resource add
Mode vpn
Step 2 Format resource_name <resource name>
service_type {VPNTunnel | PortForwarding | All}
Mode vpn-config [sslvpn-resource-settings]
Keyword Associated Keyword to
Select or Parameter to Type
Description
resource_name resource name The resource name (alphanumeric string).
service_type VPNTunnel,
PortForwarding, or All
Specifies the type of service to which the resource
applies:
• VPNTunnel. The resource applies only to a VPN
tunnel.
• PortForwarding. The resource applies only to port
forwarding.
• All. The resource applies both to a VPN tunnel and
to port forwarding.