NETGEAR ProSAFE SRX5308 - Configure Authentication Domains, Groups, and Users

Show Commands
303
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Status Show Command
show system status
This command displays the system status (also referred to as router status) information:
System Info
___________
System Name: SRX5308
Firmware Version: 4.2.0-18
Secondary Firmware Version: 4.2.0-14
Lan Port 1 Information
______________________
VLAN Profile: Sales
VLAN ID: 20
MAC Address: 00:00:00:00:00:08
IP Address: 192.168.70.1
Subnet Mask: 255.255.255.0
DHCP Status: Disabled
Lan Port 2 Information
______________________
VLAN Profile: Default
VLAN ID: 1
MAC Address: 00:00:00:00:00:01
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Status: Enabled
Lan Port 3 Information
______________________
VLAN Profile: Marketing
VLAN ID: 40
MAC Address: 00:00:00:00:00:04
IP Address: 192.168.90.5
Subnet Mask: 255.255.255.128
DHCP Status: Enabled
Lan Port 4/DMZ Information
___________________________
VLAN Profile: DMZ