NETGEAR ProSAFE SRX5308 - Ipv6 Routing Commands

Net Mode Configuration Commands
98
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
net-config[dynamic-routing]> first_key valid_to month 12
net-config[dynamic-routing]> first_key valid_to year 2011
net-config[dynamic-routing]> first_key valid_to hour 23
net-config[dynamic-routing]> first_key valid_to minute 59
net-config[dynamic-routing]> first_key valid_to second 59
net-config[dynamic-routing]> second_key authentication_id 3gry!!99OoiI
net-config[dynamic-routing]> second_key id_number 2
net-config[dynamic-routing]> second_key valid_from day 31
net-config[dynamic-routing]> second_key valid_from month 12
net-config[dynamic-routing]> second_key valid_from year 2011
net-config[dynamic-routing]> second_key valid_from hour 24
net-config[dynamic-routing]> second_key valid_from minute 00
net-config[dynamic-routing]> second_key valid_from second 00
net-config[dynamic-routing]> second_key valid_to day 31
net-config[dynamic-routing]> second_key valid_to month 03
net-config[dynamic-routing]> second_key valid_to year 2012
net-config[dynamic-routing]> second_key valid_to hour 23
net-config[dynamic-routing]> second_key valid_to minute 59
net-config[dynamic-routing]> second_key valid_to second 59
net-config[dynamic-routing]> save
Related show command: show net routing dynamic setup
IPv6 Routing Commands
net routing static ipv6 configure <route name>
This command configures an IPv6 static route. After you have issued the net routing
static ipv6 configure command to specify the name of the new route, you enter the
net-config [static-routing-ipv6] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
Step 1 Format net routing static ipv6 configure <route name>
Mode net
Step 2 Format active_flag {Y | N}
destination_address <ipv6-address>
prefix <prefix length>
gateway_address {6to4_gateway <ipv6-address> | ipv6_gateway
<ipv6-address>}
interface {WAN1 | WAN2 | WAN3 | WAN4 | Sit0-WAN | LAN | DMZ}
metric <number>
Mode net-config [static-routing-ipv6]