NETGEAR ProSAFE SRX5308 - Advanced Firewall Show Commands; Address Filter Show Commands

Show Commands
296
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show security firewall session_settings
This command displays the session time-out settings:
Session Settings
________________
TCP Session Timeout Duration:3600(Secs)
UDP Session Timeout Duration:180(Secs)
ICMP Session Timeout Duration:120(Secs)
Advanced Firewall Show Commands
show security firewall advanced algs
This command displays whether or not SIP ALG is enabled:
ALGs
____
Sip: Disabled
Address Filter Show Commands
show security address_filter enable_email_log
This command displays the configuration of the IP/MAC binding log:
Email logs for IP/MAC binding violation IPv4
____________________________________________
Email logs for IP/MAC binding violation: Enabled
Email logs for IP/MAC binding violation IPv6
____________________________________________
Email logs for IP/MAC binding violation: Disabled
show security address_filter ip_or_mac_binding setup
This command displays the IP/MAC bindings:
ROW ID Name MAC Address IP Address Log Dropped Packets IP Version
______ _______________ _________________ __________________ ___________________ __________
1 PhoneConfRoom52 d1:e1:55:54:8e:7f 192.151.1.107 Disabled IPv4
2 FinanceServer3 c3:e3:ee:f2:a2:db fec0::db8:10b1:166 Enabled IPv6