NETGEAR ProSAFE SRX5308 - Manage VPN Policies

VPN Mode Configuration Commands
238
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
SSL VPN Authentication Group Commands
vpn sslvpn users groups add
This command configures a new authentication group that is not limited to SSL VPN users.
After you have issued the vpn sslvpn users groups add command, you enter the
vpn-config [user-groups] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Command example:
SRX5308> vpn sslvpn users groups add
vpn-config[user-groups]> domain_name Headquarter
vpn-config[user-groups]> group_name Sales
vpn-config[user-groups]> idle_timeout 15
vpn-config[user-groups]> save
Related show command: show vpn sslvpn users groups
vpn sslvpn users groups edit <row id>
This command configures an existing authentication group that is not limited to SSL VPN
users. After you have issued the vpn sslvpn users groups edit command to specify
the row to be edited, you enter the vpn-config [user-groups] mode, and then you can change
the idle time-out only.
Step 1 Format vpn sslvpn users groups add
Mode vpn
Step 2 Format domain_name <domain name>
group_name <group name>
idle_timeout <minutes>
Mode vpn-config [user-groups]
Keyword Associated
Parameter to Type
Description
domain_name domain name The domain name (alphanumeric string) to which the group
belongs.
Note: For information about configuring domains, see SSL VPN
Authentication Domain Commands.
group_name group name The group name (alphanumeric string).
idle_timeout minutes The idle time-out in minutes.