NETGEAR ProSAFE SRX5308 - Bandwidth Profile Commands

Security Mode Configuration Commands
177
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Bandwidth Profile Commands
security bandwidth enable_bandwidth_profiles {Y | N}
This command enables or disables bandwidth profiles globally. Select Y to enable bandwidth
profiles globally or N to disable bandwidth profiles globally.
Related show command: show security bandwidth profile setup
security bandwidth profile add
This command configures a new bandwidth profile. After you have issued the security
bandwidth profile add command, you enter the security-config [bandwidth-profile]
mode, and then you can configure one keyword and associated parameter or associated
keyword at a time in the order that you prefer.
Format security bandwidth enable_bandwidth_profiles {Y | N}
Mode security
Step 1 Format security bandwidth profile add
Mode security
Step 2 Format name <profile name>
direction {Inbound | Outbound | Both _Directions}
inbound_minimum_rate <kbps>
inbound_maximum_rate <kbps>
outbound_minimum_rate <kbps>
outbound_maximum_rate <kbps>
is_group {Individual | Group}
max_instances <number>
Mode security-config [bandwidth-profile]
Keyword Associated Keyword to
Select or Parameter to Type
Description
name profile name The profile name (alphanumeric string).
direction Inbound, Outbound, or
Both_Directions
Specifies the direction to which the bandwidth
profile applies.
inbound_minimum_rate kbps The minimum inbound bandwidth in kbps (0 to
100000) provided to the group or individual user.
inbound_maximum_rate kbps The maximum inbound bandwidth in kbps (100 to
100000) provided to the group or individual user.