NETGEAR ProSAFE SRX5308 - Security Schedules Commands

Security Mode Configuration Commands
110
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security services ip_group delete <row id>
This command deletes a LAN or WAN IP group by deleting its row ID.
Related show command: show security services ip_group ip_setup
security services ip_group delete_ip <row id>
This command removes an IP address from a LAN or WAN IP group by deleting the row ID of
the IP address.
Related show command: show security services ip_group ip_setup
Security Schedules Commands
security schedules edit {1 | 2 | 3}
This command configures one of the three security schedules. After you have issued the
security schedule edit command to specify the row (that is, the schedule: 1, 2, or 3)
to be edited, you enter the security-config [schedules] mode, and then you can configure one
keyword and associated parameter or associated keyword at a time in the order that you
prefer.
Format security services ip_group delete <row id>
Mode security
Format security services ip_group delete_ip <row id>
Mode security
Step 1 Format security schedules edit {1 | 2 | 3}
Mode security
Step 2 Format days {all {Y | N {[days sunday {Y | N}] [days monday {Y | N}]
[days tuesday {Y | N}] [days wednesday {Y | N}] [days thursday
{Y | N}] [days friday {Y | N}] [days saturday {Y | N}]}}}
time_of-day {all_enable {Y | N {time_of_day start hours <hour>}
{time_of_day start mins <minute>} {time_of_day start meridiem
{AM | PM}} {time_of_day end hours <h
our>} {time_of_day end
mins <minute>} {time_of_day end meridiem {AM | PM}}}}
Mode security-config [schedules}