Show Commands
278
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net ipv6_tunnel status
This command displays the status of the IPv6 tunnels:
Tunnel Name IPv6 Address(es)
___________ __________________________________________________
sit0-WAN1 2002:408b:36e2::408b:36e2/64, ::127.0.0.1/96, ::176.16.2.1/96, ::192.168.1.1/96,
::192.168.20.1/96, ::192.168.70.1/96, ::64.139.54.226/96
isatap1-LAN fe80::5efe:c0a8:101/64
isatap2-LAN ::10.29.33.4/128, fe80::5efe:a1d:2104/64
show net siit setup
This command displays the status of the Stateless IP/ICMP Translation (SIIT):
SIIT Configuration
_________________
Status enabled
IPv4 Address 192.168.5.117
LAN DHCP Show Commands
show net lan dhcp leased_clients list
This command displays the LAN clients that received a leased DHCP IP address:
List of Available DHCP Leased Clients
_____________________________________
show net lan dhcp logs
This command displays the LAN DHCP log:
Jul 10 10:23:50 SRX5308 local7.info dhcpd: Wrote 0 deleted host decls to leases file.
Jul 10 10:23:50 SRX5308 local7.info dhcpd: Wrote 0 new dynamic host decls to leases file.
Jul 10 10:23:50 SRX5308 local7.info dhcpd: Wrote 0 leases to leases file.
Jul 10 10:23:51 SRX5308 local7.info dhcpd: Listening on LPF/eth0.4094/00:00:00:00:00:06/176.16.2.0/24
Jul 10 10:23:51 SRX5308 local7.info dhcpd: Sending on LPF/eth0.4094/00:00:00:00:00:06/176.16.2.0/24
Jul 10 10:23:51 SRX5308 local7.err dhcpd:
Jul 10 10:23:51 SRX5308 local7.err dhcpd: No subnet declaration for eth0.20 (192.168.70.1).
To Next Page
Loading...
