NETGEAR ProSAFE SRX5308 - Attack Checks Show Commands

Show Commands
294
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show security firewall ipv6 setup
This command displays all configured IPv6 firewall rules:
Default Outbound Policy
_______________________
For IPv6 : Allow Always
List of Available IPv6 Firewall Rules
_____________________________________
ROW ID Status Rule Type Service Action Source Users Destination Users Log Qos Priority Schedule
______ _______ __________ _______________ _________________________________ _______________________________________ ________________________ ______ ______________ _________
130 Enabled WAN To LAN RTELNET ALLOW Always 2002::B32:AAB1:fD41 FEC0::db8:145 Always Normal-Service
131 Enabled WAN To LAN HTTP ALLOW Always Any Any Never Normal-Service
132 Enabled LAN To WAN HTTP ALLOW Always Any Any Never Normal-Service
133 Enabled LAN To WAN HTTPS ALLOW Always Any Any Never Normal-Service
134 Enabled DMZ To WAN FTP ALLOW by schedule,otherwise block FEC0::db8:10a1:201 - FEC0::db8:10a1:299 2001:db6::30f4:fbbf:ccbc Never Normal-Service schedule1
135 Enabled WAN To DMZ VDOLIVE BLOCK Always Any 176::1150 - 176::1200 Always Normal-Service
136 Enabled DMZ To LAN RTSP:TCP BLOCK Always Any Any Always Normal-Service
137 Enabled DMZ To LAN RTSP:UDP BLOCK Always Any Any Always Normal-Service
138 Enabled LAN To DMZ ICMPv6-TYPE-134 BLOCK Always Any 176::1121 - 176::1142 Always Normal-Service
Attack Checks Show Commands
show security firewall attack_checks igmp
This command displays whether the IGMP proxy is enabled:
IGMP Configuration
__________________
Igmp Proxy: Disabled
show security firewall attack_checks setup ipv4
This command displays which WAN and LAN security checks are enabled for IPv4:
Attack Checks
_____________
WAN Security Checks:
_____________________
Respond to ping on Wan : No
Enable Stealth mode : Yes
Block TCP Flood : Yes
LAN Security Checks:
_____________________
Block UDP Flood : No
Disable Ping Reply on LAN Ports : Yes