NETGEAR ProSAFE SRX5308 - Session Limits Show Commands

Show Commands
295
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show security firewall attack_checks setup ipv6
This command displays which security checks are enabled for IPv6:
Attack Checks IPv6
__________________
WAN Security Checks:
Respond to ping on Wan : No
VPN IPSec Passthrough : Yes
show security firewall attack_checks vpn_passthrough setup
This command displays which VPN pass-through features are enabled:
Passthrough
___________
IPSec VPN Passthrough:
IPSec Passthrough : Enabled
PPTP Passthrough : Disabled
L2TP Passthrough : Enabled
Session Limits Show Commands
show security firewall session_limit
This command displays the session limit settings:
Session Settings
________________
Session Limit Enable: Enabled
Connection Limit Type: 0
User Connection Limit: 80
TCP Session Timeout Duration: 3600(Secs)
UDP Session Timeout Duration: 180(Secs)
ICMP Session Timeout Duration: 120(Secs)