NETGEAR ProSAFE SRX5308 - Schedules Show Command; Firewall Rules Show Command; Show Security Schedules Setup; Show Security Firewall Ipv4 Setup Lan_Wan

Show Commands
292
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Schedules Show Command
show security schedules setup
This command displays the configured schedules:
Schedules
_________
List of Available Schedules
ROW ID Name Days Start Time End Time
______ _________ _________________________ __________ ________
1 schedule1 Monday, Wednesday, Friday 07:15 AM 06:30 PM
2 schedule2 All Days 12:00 AM 11:59 PM
3 schedule3 All Days 12:00 AM 12:00 AM
Firewall Rules Show Command
show security firewall ipv4 setup lan_wan
This command displays the configured IPv4 LAN WAN firewall rules:
Default Outbound Policy for IPv4 : Allow Always
LAN WAN Outbound Rules.
_______________________
ROWID Status Service Name Filter LAN User WAN User QoS Profile Bandwidth Profile Log
_____ _______ ____________ _________________________________ _____________ ________ ___________ _________________ ______
29 Enabled HTTP ALLOW Always SalesAmericas Any None PriorityQueue Never
30 Enabled AIM BLOCK by schedule,otherwise allow Any Any Voice NONE Always
LAN WAN Inbound Rules.
______________________
ROWID Status Service Name Filter LAN Server IP Address LAN User WAN User Destination QoS Profile Bandwidth Profile Log
_____ _______ ____________ _________________________________ _____________________ ________ ____________ ___________ ___________ _________________ ______
31 Enabled FTP ALLOW Always 192.168.5.71 Any None NONE Never
32 Enabled RTSP:TCP BLOCK by schedule,otherwise allow 192.168.20.171 VIPcustomers WAN1 Voice NONE Always