NETGEAR ProSAFE SRX5308 - Ipv4 LAN Show Commands; Show Net Lan Ipv4 Setup

Show Commands
280
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 LAN Show Commands
show net lan ipv4 setup
This command displays the IPv4 LAN configuration:
VLAN Profiles
_____________
Status Profile Name VLAN Id IPv4 Address Subnet Mask DHCP Status Server Address
________ ____________ _______ ____________ _______________ ___________ _____________________________
Enabled Default 1 192.168.1.1 255.255.255.0 DHCP Server 192.168.1.100 - 192.168.1.254
Enabled Sales 20 192.168.70.1 255.255.255.0 Disabled Not Applicable
Disabled Marketing 40 192.168.90.5 255.255.255.128 Disabled Not Applicable
Default VLAN
____________
Port1: Sales
Port2: Default
Port3: Default
Port4: DMZ
show net lan ipv4 detailed setup <vlan id>
This command displays the detailed configuration for a VLAN. For the VLAN ID, type a VLAN
number.
Detailed Setup (IPv4) of VLAN :- Default
________________________________________
Status: : Enabled
Profile Name: : Default
VLAN Id: : 1
IPv4 Address: : 192.168.1.1
Subnet Mask: : 255.255.255.0
DHCP Status: : DHCP Server
Server Address: : 192.168.1.100 - 192.168.1.254
Primary DNS Server: :
Secondary DNS Server: :
WINS Server: :
Lease Time: : 24
LDAP Status: : Disabled
DNS Proxy: : Enabled
Inter VLAN Routing: : Disabled