NETGEAR ProSAFE SRX5308 - Set User Login Policies

Show Commands
313
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
SSL VPN Show Commands
show vpn sslvpn client
This command displays the SSL VPN client ranges and configurations:
SSL VPN Client(IPv4)
____________________
Enable Full Tunnel Support: Yes
DNS Suffix:
Primary DNS Server: 192.168.10.5
Secondary DNS Server: 192.168.10.6
Client Address Range Begin: 192.168.251.1
Client Address Range End: 192.168.251.254
SSL VPN Client(IPv6)
____________________
Enable Full Tunnel Support: No
DNS Suffix:
Primary DNS Server:
Secondary DNS Server:
Client Address Range Begin: 4000::1
Client Address Range End: 4000::200
show vpn sslvpn logs
This command displays the SSL VPN logs (the following example shows only part of the
command output):
Mon Jul 9 11:00:18 2012(GMT -0800) [SRX5308][SSLVPN][SSLVPN] SSL_INFO : Login
Successful for geardomain user admin(Admin) from host 10.110.205.58
Mon Jul 9 12:04:09 2012(GMT -0800) [SRX5308][SSLVPN][SSLVPN] SSL_INFO :user
admin is Logged-Out successfully from host 10.110.205.58
Mon Jul 9 12:04:20 2012(GMT -0800) [SRX5308][SSLVPN][SSLVPN] SSL_INFO : Login
Successful for geardomain user techwriter(Admin) from host 10.110.205.58
Mon Jul 9 16:00:34 2012(GMT -0800) [SRX5308][SSLVPN][SSLVPN] SSL_INFO : Login
Successful for geardomain user techwriter(Admin) from host 10.110.205.58
Mon Jul 9 16:10:54 2012(GMT -0800) [SRX5308][SSLVPN][SSLVPN] SSL_INFO : Login
Successful for geardomain user admin(Admin) from host 10.110.205.58