NETGEAR ProSAFE SRX5308 - Security Content_Filter Block_Group Enable

Security Mode Configuration Commands
181
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security content_filter block_group enable
This command applies content filtering to selected groups or to all groups. After you have
issued the security content_filter block_group enable command, you enter the
security-config [block-group-enable] mode, and then you can select a group, several groups,
or all groups.
Command example:
SRX5308> security content_filter blocked_group enable
security-config[block-group-enable]> group group1 Y
security-config[block-group-enable]> group group2 Y
security-config[block-group-enable]> group group3 Y
security-config[block-group-enable]> group group8 Y
security-config[block-group-enable]> save
Step 1 Format security content_filter block_group enable
Mode security
Step 2 Format group all {Y}
group group1 {Y}
group group2 {Y}
group group3 {Y}
group group4 {Y}}
group group5 {Y}
group group6 {Y}
group group7 {Y}
group group8 {Y}
Mode security-config [block-group-enable]
Keyword Associated Keyword
to Select
Description
group all Y
Enables content filtering for all groups.
group group1 Y
Enables content filtering for the selected group.
group group2 Y
group group3 Y
group group4 Y
group group5 Y
group group6 Y
group group7 Y
group group8 Y