NETGEAR ProSAFE SRX5308 - SSL VPN Port Forwarding Commands

VPN Mode Configuration Commands
246
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Command example:
SRX5308> vpn sslvpn users users browser_policies 4
vpn-config[user-browser-policy]> add_browser NetscapeNavigator
vpn-config[user-browser-policy]> enable_or_disable_login_from_defined_browsers N
vpn-config[user-browser-policy]> save
vpn-config[user-browser-policy]> add_browser InternetExplorer
vpn-config[user-browser-policy]> enable_or_disable_login_from_defined_browsers N
vpn-config[user-browser-policy]> save
Related show command: show vpn sslvpn users users and show vpn sslvpn users browser_policies
<row id>
SSL VPN Port Forwarding Commands
vpn sslvpn portforwarding appconfig add
This command configures a new SSL port forwarding application. After you have issued the
vpn sslvpn portforwarding appconfig add command, you enter the
vpn-config [portforwarding-settings] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
enable_or_disable_login_from_defined_browsers
Y or N Specifies whether access
through the browsers on
the browser list is allowed
or denied:
• Yes. Allows access
through the browsers on
the browser list.
• No. Denies access
through the browsers on
the browser list.
Step 1 Format vpn sslvpn portforwarding appconfig add
Mode vpn
Step 2 Format server_ip <ipaddress>
port <number>
Mode vpn-config [portforwarding-settings]
Keyword Associated Keyword to
Select or Parameter to Type
Description