NETGEAR ProSAFE SRX5308 - Overview of the SSL Configuration Process

Show Commands
276
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net wan wan ipv6 setup <wan interface>
This command displays the IPv6 WAN configuration. For the WAN interface, type WAN1,
WAN2, WAN3, or WAN4.
IPv6 WAN1 Setup
_______________
Dynamic IPv6 (DHCP) Configuration:
Stateless Address Auto Configuration: Enabled
Prefix Delegation: Disabled
show net wan wan ipv6 status <wan interface>
This command displays the IPv6 WAN1 connection status. For the WAN interface, type
WAN1, WAN2, WAN3, or WAN4.
IPv6 WAN1 Status
________________
IPv6 Connection Type: Dynamic IPv6 (DHCP)
IPv6 Connection State: Connected
IPv6 Address: fe80::a8ab:bbff:fe00:2
IPv6 Prefix Length: 64
Default IPv6 Gateway:
Primary DNS Server:
Secondary DNS Server:
show net protocol_binding setup
This command displays the protocol bindings:
List of Protocol Bindings.
__________________________
ROW ID State Service Local Gateway Source Network Destination Network
______ _______ _______ _____________ ______________ ___________________
1 Enabled FTP WAN1 Any 10.122.178.214
2 Enabled PPTP WAN3 Any Any
3 Enabled ANY WAN1 Any Any