Show Commands
275
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Gateway IP Address: 10.139.54.225
Domain Name Servers (DNS) Source: Use these DNS Servers
Primary DNS Server: 10.80.130.23
Secondary DNS Server: 10.80.130.24
show net wan wan ipv4 status <wan interface>
This command displays the IPv4 WAN connection status. For the WAN interface, type WAN1,
WAN2, WAN3, or WAN4.
WAN1 Status
___________
WAN1 Status (Ipv4):
MAC Address: AA:AB:BB:00:00:02
IPv4 Address: 10.139.54.228 / 255.255.255.248
Wan State: UP
NAT (IPv4 only): Enabled
IPv4 Connection Type: STATIC
IPv4 Connection State: Connected
Link State: LINK UP
WAN Mode: Use only single WAN portWAN1
Gateway: 10.139.54.225
Primary DNS: 10.80.130.23
Secondary DNS: 8.8.8.8
show net wan wan ipv4 secondary_addresses <wan interface>
This command displays the secondary IPv4 addresses for a WAN interface. For the WAN
interface, type WAN1, WAN2, WAN3, or WAN4.
WAN2 Secondary Addresses
________________________
List of Secondary WAN addresses
_______________________________
Row Id: 1
IP Address: 10.168.50.1
Subnet Mask: 255.255.255.0
To Next Page
Loading...
