NETGEAR ProSAFE SRX5308 - Upnp Command; Security Upnp Configure

Security Mode Configuration Commands
176
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
UPnP Command
security upnp configure
This command configures Universal Plug and Play (UPnP). After you have issued the
security upnp configure command, you enter the security-config [upnp] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
Command example:
SRX5308> security upnp configure
security-config[upnp]> enable Y
security-config[upnp]> advertisement period 60
security-config[upnp]> advertisement time_to_live 6
security-config[upnp]> save
Related show command: show security upnp setup and show security upnp portmap
Step 1 Format security upnp configure
Mode security
Step 2 Format enable {Y | N}
advertisement period <seconds>
advertisement time_to_live <number>
Mode security-config [upnp]
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
enable Y or N Enables or disables UPnP.
advertisement period seconds The advertisement period in seconds,
from 1 to 1440 seconds.
advertisement time_to_live number The advertisement time-to-live period in
hops, from 1 to 255 hops.