NETGEAR ProSAFE SRX5308 - Firmware Backup, Restore, and Upgrade Commands

Utility Commands
322
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Firmware Backup, Restore, and Upgrade Commands
util backup_configuration
This command backs up the configuration file of the VPN firewall to a TFTP server.
util upload_configuration
This command uploads a previously backed-up configuration file of the VPN firewall from a
TFTP server.
util firmware_upgrade
This command upgrades the firmware of the VPN firewall from a TFTP server.
util reboot
This command reboots the VPN firewall. It takes about 3 minutes for the VPN firewall to come
back up.
Format util backup_configuration <destination file name> <tftp server address>
Mode util
Format util upload_configuration <source file name> <tftp server address>
Mode util
Format util firmware_upgrade <source file name> <tftp server address>
Mode util
Format util reboot
Mode util