NETGEAR ProSAFE SRX5308 - SSL VPN User Commands

VPN Mode Configuration Commands
239
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Related show command: show vpn sslvpn users groups
vpn sslvpn users groups delete <row id>
This command deletes an authentication group by specifying its row ID.
Related show command: show vpn sslvpn users groups
SSL VPN User Commands
vpn sslvpn users users add
This command configures a new user account. The command is not limited to SSL VPN
users. After you have issued the vpn sslvpn users users add command, you enter the
vpn-config [users] mode, and then you can configure one keyword and associated parameter
or associated keyword at a time in the order that you prefer.
Step 1 Format vpn sslvpn users groups edit <row id>
Mode vpn
Step 2 Format idle_timeout <minutes>
Mode vpn-config [user-groups]
Keyword Associated
Parameter to Type
Description
idle_timeout minutes The idle time-out in minutes.
Format vpn sslvpn users groups delete <row id>
Mode vpn
Step 1 Format vpn sslvpn users users add
Mode vpn