NETGEAR ProSAFE SRX5308 - Port Triggering Show Commands

Show Commands
297
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show security address_filter mac_filter setup
This command displays the configuration of the MAC filter and the MAC addresses for
source MAC filtering:
Source MAC Filter
__________________
MAC Filtering: Enabled
Policy for MAC Addresses: Block and Permit the rest
List of Available MAC Addresses
________________________________
ROW ID MAC Address
______ _________________
1 aa:11:bb:22:cc:33
2 a1:b2:c3:de:11:22
3 a1:b2:c3:de:11:25
Port Triggering Show Commands
show security porttriggering_rules setup
This command displays the port triggering rules:
Port Triggering
_______________
List of Available Port Triggering Rules
_______________________________________
ROW ID: 1
Name: Skype
Enable: Yes
Type: TCP
Interface: LAN
Outgoing Start Port: 61196
Outgoing End Port: 61196
Incoming Start Port: 61197
Incoming End Port: 61197