NETGEAR ProSAFE SRX5308 - Access the CLI

Introduction
16
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Access the CLI
You can access the CLI by logging in with the same user credentials (user name and
password) that you use to access the web management interface. SRX5308> is the CLI
prompt.
SRX5308 login: admin
Password:
************************************************
Welcome to SRX5308 Command Line Interface
************************************************
SRX5308>
Right arrow Go forward one character.
Deleting
Ctrl-C Delete the entire line.
Ctrl-D Delete the next character.
Ctrl-K Delete all characters to the end of the line from where the cursor is located.
Backspace Delete the previous character.
Invoking escape sequences
!! Substitute the previous line.
!N Substitute the Nth line, in which N is the absolute line number as displayed in the
output of the history command.
!-N Substitute the line that is located N lines before the current line, in which N is a relative
number in relation to the current lint.
Table 6. CLI editing conventions (continued)
Key or Key Sequence Description