Overview of the Configuration Commands
24
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
VPN Settings (VPN Mode) Configuration Commands
Enter the vpn ? command at the CLI prompt to display the submodes in the vpn mode. The
following table lists the submodes and their commands in alphabetical order:
remote_management
system remote_management https
configure
Configure remote management over HTTPS.
system remote_management telnet
configure
Configure remote management over Telnet.
snmp
system snmp sys configure Configure the SNMP system information.
time
system time configure Configure the system time, date, and NTP
servers.
traffic_meter
system traffic_meter configure
<wan interface>
Configure the WAN traffic meter.
Table 10. Configuration commands: vpn mode
Submode Command Name Purpose
ipsec
vpn ipsec ikepolicy configure <ike policy name> Configure a new or existing manual IPSec
IKE policy.
vpn ipsec ikepolicy delete <ike policy name> Delete an IPSec policy.
vpn ipsec mode_config configure <record name> Configure a new or existing Mode Config
record.
vpn ipsec mode_config delete <record name> Delete a Mode Config record.
vpn ipsec radius configure Configure the RADIUS servers.
vpn ipsec vpnpolicy configure <vpn policy name> Configure a new or existing auto IPSec
VPN policy or manual IPSec VPN policy.
vpn ipsec vpnpolicy connect <vpn policy name> Establish a VPN connection.
vpn ipsec vpnpolicy delete <vpn policy name> Delete an IPSec VPN policy.
vpn ipsec vpnpolicy disable <vpn policy name> Disable an IPSec VPN policy.
vpn ipsec vpnpolicy drop <vpn policy name> Terminate an IPSec VPN connection.
vpn ipsec vpnpolicy enable <vpn policy name> Enable an IPSec VPN policy.
vpn ipsec wizard configure <Gateway | VPN_Client> Configure the IPSec VPN wizard for a
gateway-to-gateway or gateway-to-VPN
client connection.
l2tp vpn l2tp server configure Configure the L2TP server.
Table 9. System mode configuration commands (continued)
Submode Command Name Purpose
To Next Page
Loading...
