NETGEAR ProSAFE SRX5308 - Virtual Private Networking Using IPSec and L2 TP Connections

System Mode Configuration Commands
201
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Firewall Logs and Email Alerts Commands
system logging configure
This command configures routing logs for accepted and dropped IPv4 and IPv6 packets,
selected system logs, and logs for other events. After you have issued the system
logging configure command, you enter the system-config [logging-ipv4-ipv6] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
Step 1 Format system logging configure
Mode system
Step 2 Format lan_wan_accept_packet_logs {Y | N}
lan_wan_drop_packet_logs {Y | N}
lan_dmz_accept_packet_logs {Y | N}
lan_dmz_drop_packet_logs {Y | N}
dmz_wan_accept_packet_logs {Y | N}
dmz_wan_drop_packet_logs {Y | N}
wan_lan_accept_packet_logs {Y | N}
wan_lan_drop_packet_logs {Y | N}
dmz_lan_accept_packet_logs {Y | N}
dmz_lan_drop_packet_logs {Y | N}
wan_dmz_accept_packet_logs {Y | N}
wan_dmz_drop_packet_logs {Y | N}
change_of_time_by_NTP_logs {Y | N}
login_attempts_logs {Y | N}
secure_login_attempts_logs {Y | N}
reboot_logs {Y | N}
u
nicast_traffic_logs {Y | N}
broadcast_or_multicast_traffic_logs {Y | N}
wan_status_logs {Y | N}
resolved_DNS_names_logs {Y | N}
vpn_logs {Y | N}
dhcp_server_logs {Y | N}
source_mac_filter_logs {Y | N}
session_limit_logs {Y | N}
bandwidth_limit_logs {Y | N}
Mode system-config [logging-ipv4-ipv6]