NETGEAR ProSAFE SRX5308 - SNMP Commands; System Snmp Sys Configure

System Mode Configuration Commands
191
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
SNMP Commands
system snmp sys configure
This command configures the SNMP system information. After you have issued the system
snmp sys configure command, you enter the system-config [snmp-system] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
Command example:
SRX5308> system snmp sys configure
system-config[snmp-system]> sys_contact AdminSRX@netgear.com
system-config[snmp-system]> sys_location San Jose
system-config[snmp-system]> sys_name SRX5308-Bld3
system-config[snmp-system]> save
Related show command: show system snmp sys
Step 1 Format system snmp sys configure
Mode system
Step 2 Format sys_contact <contact name>
sys_location <location name>
sys_name <system name>
Mode system-config [snmp-system]
Keyword Associated
Parameter to Type
Description
sys_contact contact name The system contact name (alphanumeric string).
sys_location location name The system location name (alphanumeric string).
sys_name system name The system name (alphanumeric string).