NETGEAR ProSAFE SRX5308 - Routing Show Commands

Show Commands
288
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Routing Show Commands
show net routing dynamic setup
This command displays the dynamic routing configuration:
Dynamic Routing
_______________
RIP
___
RIP Direction Both
RIP Version RIP-2M
Authentication for RIP-2B/2M: Enabled
First Key Parameters
MD5 Key Id: 1
MD5 Auth Key: *****
Not Valid Before: 2011/12/01@07:00:00
Not Valid After: 2012/12/31@23:59:59
Second Key Parameters
MD5 Key Id: 2
MD5 Auth Key: *****
Not Valid Before: 2012/12/31@24:00:00
Not Valid After: 2013/03/31@23:59:59
show net routing static ipv4 setup
This command displays the IPv4 static routes configuration:
Name Destination Gateway Interface Metric Active Private
---- ----------- ------- --------- ------ ------- -------
Orly 10.118.215.178 10.192.44.13 WAN1 7 1 1
show net routing static ipv6 setup
This command displays the IPv6 static routes configuration:
Name Destination Gateway Interface Metric Active
---- ----------- ------- --------- ------ -------
SFO2 2002:201b:24e2::1001 FE80::2001:5efe:ab23 WAN1 2 1