NETGEAR ProSAFE SRX5308 - Show Security Firewall Ipv4 Setup Dmz_Wan; Show Security Firewall Ipv4 Setup Lan_Dmz

Show Commands
293
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show security firewall ipv4 setup dmz_wan
This command displays the configured IPv4 DMZ WAN firewall rules:
Default Outbound Policy for IPv4 : Allow Always
DMZ WAN Outbound Rules.
_______________________
ROWID Status Service Name Filter DMZ User WAN User QoS Profile Log
_____ _______ ____________ _________________________________ ________ ________ ___________ _____
15 Enabled CU-SEEME:TCP BLOCK by schedule,otherwise allow Any Any Video Never
23 Enabled ANY BLOCK Always Any Any None Never
DMZ WAN Inbound Rules.
______________________
ROWID Status Service Name Filter DMZ Server IP Address DMZ User WAN User Destination QoS Profile Log
_____ _______ ____________ ____________ _____________________ ________ ____________ ___________ ___________ ______
16 Enabled BOOTP_CLIENT ALLOW Always 192.168.24.112 10.132.215.4 10.168.50.1 None Always
24 Enabled ANY BLOCK Always Any WAN1 None Never
show security firewall ipv4 setup lan_dmz
This command displays the configured IPv4 LAN DMZ firewall rules:
Default Outbound Policy for IPv4 : Allow Always
LAN DMZ Outbound Rules.
_______________________
ROWID Status Service Name Filter LAN User DMZ User Log
_____ _______ ____________ ____________ ________ _________________________ _____
17 Enabled FTP ALLOW Always GROUP4 176.14.2.30 - 176.14.2.79 Never
25 Enabled ANY BLOCK Always Any Any Never
LAN DMZ Inbound Rules.
______________________
ROWID Status Service Name Filter DMZ User LAN User Log
_____ _______ ____________ _________________________________ ____________ _____________ ______
18 Enabled SSH:UDP BLOCK by schedule,otherwise allow 176.16.2.101 192.168.5.108 Always
26 Enabled ANY BLOCK Always Any Any Never