NETGEAR ProSAFE SRX5308 - VPN Settings (VPN Mode) Show Commands; Ipsec VPN Show Commands; Show Vpn Ipsec Ikepolicy Setup; Show Vpn Ipsec Vpnpolicy Setup

Show Commands
311
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
image 1 : 0
productId : SRX5308
maccnt0: 0x22
maccnt1: 0x0
maccnt2: 0x0
maccnt3: 0x0
**************************
VPN Settings (VPN Mode) Show Commands
This section contains the following subsections:
• IPSec VPN Show Commands
• SSL VPN Show Commands
• SSL VPN User Show Commands
• RADIUS Server Show Command
• PPTP Server Show Commands
• L2TP Server Show Commands
IPSec VPN Show Commands
show vpn ipsec ikepolicy setup
This command displays the IKE policies:
List of IKE Policies
____________________
Name Mode Local ID Remote ID Encryption Authentication DH Group
_________________ __________ ______________________ _____________ __________ ______________ ____________
iphone aggressive 10.139.54.228 0.0.0.0 AES-128 SHA-1 Group 2 (1024 bit)
SRX5308-to-Peer44 main fe80::a8ab:bbff:fe00:2 peer44.com 3DES SHA-1 Group 2 (1024 bit)
SRX-to-Paris main 10.139.54.228 10.112.71.154 3DES SHA-1 Group 2 (1024 bit)
show vpn ipsec vpnpolicy setup
This command displays the IPSec VPN policies:
Status Name Type IPSec Mode Local Remote Auth Encr
_______ _________________ ___________ ___________ ______________________________________ ______________________________ _____ ____
Enabled SRX5308-to-Peer44 Auto Policy Tunnel Mode 2002:408b:36e4:a:a8ab:bbff:fe00:1 / 64 fe80::a4bb:ffdd:fe01:2 / 64 SHA-1 3DES
Enabled SRX-to-Paris Auto Policy Tunnel Mode 192.168.1.0 / 255.255.255.0 192.168.50.0 / 255.255.255.255 SHA-1 3DES