NETGEAR ProSAFE SRX5308 - Page 240

VPN Mode Configuration Commands
240
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Command example:
SRX5308> vpn sslvpn users users add
vpn-config[users]> user_name PeterBrown
vpn-config[users]> user_type SSLVPNUser
vpn-config[users]> group Sales
vpn-config[users]> password 3goTY5!Of6hh
vpn-config[users]> confirm_password 3goTY5!Of6hh
vpn-config[users]> idle_timeout 10
vpn-config[users]> save
Related show command: show vpn sslvpn users users
Step 2 Format user_name <user name>
user_type {SSLVPNUser | Administrator | Guest | IPSECVPNUser |
L2TPUser | PPTPUser}
group <group name>
password <password>
confirm_password <password>
idle_timeout <minutes>
Mode vpn-config [users]
Keyword Associated Keyword to Select
or Parameter to Type
Description
user_name user name The user name (alphanumeric string)
user_type SSLVPNUser, Administrator,
Guest, IPSECVPNUser,
L2TPUser, or PPTPUser
Specifies the user type.
group group name The group name (alphanumeric string) to which the
user belongs.
Note: For information about how to configure
groups, see SSL VPN Authentication Group
Commands.
password password The password (alphanumeric string) that is assigned
to the user. You need to issue the
confirm_password keyword and confirm the
password.
confirm_password password The confirmation of the password.
idle_timeout minutes The idle time-out in minutes.