NETGEAR ProSAFE SRX5308 - Configure Domains, Groups, and Users

Show Commands
281
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net ethernet {interface name | all}
This command displays the MAC address and VLAN status for a single or all Ethernet
interfaces.
SRX5308> show net ethernet eth0
MAC Address: DE:AD:DE:AD:DE:AF
VLAN ID: 1
Interface Name: eth0
VLAN Enabled: N
Native VLAN: N
SRX5308> show net ethernet all
Ethernet Interfaces
___________________
VLAN ID Interface Name VLAN Enabled Native VLAN
_______ ______________ ____________ ___________
1 eth0 N N
1 eth1 N N
show net lan ipv4 advanced setup
This command displays the advanced IPv4 LAN configuration:
LAN Advanced Setup
__________________
VLAN MAC Settings:
MAC Address for VLANs: Unique
Advanced Settings:
ARP Broadcast: Enabled
show net lan available_lan_hosts list
This command displays the IPv4 hosts (that is, the known computers and devices in the
LAN):
List of Available Lan Hosts
___________________________