NETGEAR ProSAFE SRX5308 - Page 11

Introduction
11
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
net
(continued)
siit Stateless IP/ICMP Translation Network Configuration > SIIT
wan IPv4 WAN (Internet) settings
Secondary IPv4 WAN addresses
IPv6 WAN (Internet) settings
MTU, port speed, and MAC
address, failure detection method,
and upload/download settings
Network Configuration > WAN Settings
wan_settings NAT or Classical Routing
Load balancing settings for IPv4
Network Configuration > WAN Settings
Security configuration commands
security address_filter Source MAC filters
IP/MAC bindings for IPv4
IP MAC bindings for IPv6
Security > Address Filter
bandwidth Bandwidth profiles Security > Bandwidth Profile
content_filter Group filtering
Blocked keywords
Web components
Trusted domains
Security > Content Filtering
firewall All IPv4 firewall rules
All IPv6 firewall rules
Attack checks
Session limits and time-outs
SIP ALG
Security > Firewall
porttriggering_rules Security > Port Triggering
schedules Security > Schedule
services Custom services
LAN and WAN IP groups
LAN QoS profiles
Security > Services
upnp Security > UPnP
Administration and monitoring configuration commands
system logging Monitoring > Firewall Logs & E-mail
remote_management Administration > Remote Management
snmp Administration > SNMP
Table 3. Main configuration modes (continued)
__________________________CLI________________________ ___Web Management Interface (GUI)___
Main Mode Submode Feature That You Can Configure Basic Path