NETGEAR ProSAFE SRX5308 - Page 125

Security Mode Configuration Commands
125
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
send_to_lan_server {SINGLE_ADDRESS {send_to_lan_server_start_ip
<ipaddress>} | ADDRESS_RANGE {send_to_lan_server_start_ip
<ipaddress>} {send_to_lan_server_end_ip <ipaddress>}}
translate_to_port_number enable {N | Y
{translate_to_port_number port <number>}}
wan_destination_ip_address {{WAN1 | WAN2 | WAN3 | WAN4} | RANGE
{wan_destination_ip_address_start <ipaddress>}
{wan_destination_ip_address_end <ipaddress>}}
lan_user {address_wise {ANY | SINGLE_ADDRESS {lan_user_start_ip
<ipaddress>} | ADDRESS_RANGE {lan_user_start_ip <ipaddress>}
{lan_user_end_ip <ipaddress>}} | group_wise <group name>}
wan_users {address_wise {ANY | SINGLE_ADDRESS {wan_user_start_ip
<ipaddress>} | ADDRESS_RANGE {wan_user_start_ip <ipaddress>}
{wan_user_end_ip <ipaddress>}} | group_wise <group name>}
q
os_profile <profile name>
log {NEVER | ALWAYS}
bandwidth_profile <profile name>
Mode security-config [firewall-ipv4-lan-wan-inbound]
Keyword (might consist of two
separate words)
Associated Keyword to Select or
Parameter to Type
Description
Service name, action, and schedule
service_name
default_services
ANY, AIM, BGP, BOOTP_CLIENT,
BOOTP_SERVER, CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP,
DNS:TCP, FINGER, FTP, HTTP,
HTTPS, ICMP-TYPE-3,
ICMP-TYPE-4, ICMP-TYPE-5,
ICMP-TYPE-6, ICMP-TYPE-7,
ICMP-TYPE-8, ICMP-TYPE-9,
ICMP-TYPE-10, ICMP-TYPE-11,
ICMP-TYPE-13, ICQ, IMAP2,
IMAP3, IRC, NEWS, NFS, NNTP,
PING, POP3, PPTP, RCMD,
REAL-AUDIO, REXEC, RLOGIN,
RTELNET, RTSP:TCP, RTSP:UDP,
SFTP, SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP, STRMWO
RKS,
TACACS, TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP,
IDENT, VDOLIVE, SSH, SIP-TCP,
SIP-UDP, NFS-TCP, or RPC-TCP
Specifies the default service and
protocol to which the firewall rule
applies.