NETGEAR ProSAFE SRX5308 - Page 141

Security Mode Configuration Commands
141
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
wan_destination_ip_address
WAN1, WAN2, WAN3, or WAN4 Specifies the IP address of the
selected WAN interface as the
destination address.
Note: The
wan_destination_ip_address
and
wan_destination_ip_address_start
keywords are mutually exclusive.
wan_destination_ip_address_start
ipaddress The WAN IP address, if the
destination address is different
from the IP address of a WAN
interface, for example, a secondary
WAN IP address.
Note: The
wan_destination_ip_address
and
wan_destination_ip_address_start
keywords are mutually exclusive.
DMZ user addresses and WAN user addresses
dmz_users ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
Specifies the type of DMZ address.
For an inbound rule, this option is
available only when the WAN mode
is Classical Routing.
dmz_user_start_ip ipaddress There are two options:
• The IP address if the dmz_users
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
dmz_users keyword is set to
ADDRESS_RANGE.
dmz_user_end_ip ipaddress The end IP address if the
dmz_users keyword is set to
ADDRESS_RANGE.
wan_users address_wise ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
Specifies the type of WAN address.
The address_wise and
group_wise keywords are
mutually exclusive.
wan_user_start_ip ipaddress There are two options:
• The IP address if the wan_user
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
wan_user keyword is set to
ADDRESS_RANGE.
Keyword (might consist of two
separate words)
Associated Keyword to Select or
Parameter to Type
Description