NETGEAR ProSAFE SRX5308 - Page 194

System Mode Configuration Commands
194
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
vpn_policy vpn policy name If the ntp_mode keyword is set to
Sync_to_NTP_Servers_on_VPN, the name
of the VPN policy that enables the VPN firewall
to contact the NTP server on the VPN.
use_default_servers Y or N Enables or disables the use of default NTP
servers.
configure_ntp_servers Y or N Enables or disables the use of custom NTP
servers. If you enable the use of custom NTP
servers, you need to specify the server IP
addresses or domain names with the
ntp_server1 and ntp_server2 keywords.
ntp_server1 ipaddress or domain name The IP address of domain name of the first
custom NTP server.
ntp_server2 ipaddress or domain name The IP address of domain name of the second
custom NTP server.
Table 11. Timezone keywords
GMT time and location
Note: Enter the keywords exactly as stated (you can use autocompletion keys). If
there are two locations for the same time zone, enter the location exactly as stated.
For example, either enter GMT-11:00::Samoa or enter GMT-10:00::Hawaii.
GMT::Greenwich-Mean-Time:Edinburgh,London
GMT-12:00::Eniwetok
GMT-12:00::Kwajalein
GMT-11:00::Midway_Island
GMT-11:00::Samoa
GMT-10:00::Hawaii
GMT-09:30::Marquesas_Is
GMT-09:00::Alaska
GMT-08:30::Pitcairn_Is
GMT-08:00::Pacific_Time-Canada
GMT-08:00::Pacific_Time-US
GMT-08:00::Tijuana
GMT-07:00::Mountain_Time-Canada
GMT-07:00::Mountain_Time-US
Keyword Associated Keyword to
Select or Parameter to Type
Description