NETGEAR ProSAFE SRX5308 - Create an IPv4 Gateway-to-Gateway VPN Tunnel with the Wizard

System Mode Configuration Commands
204
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
email_logs_enable {Y | N}
email_server {ipaddress | domain name}
return_email <email address>
send_to_email <email address>
smtp_custom_port <number>
smtp_auth type {None | Plain {smtp_auth username <user name>}
{smtp_auth password <password>} | CRAM-MD5 {smtp_auth
username <user name>} {smtp_auth password <password>}}
identd_from_smtp_server_enable {Y | N}
schedule unit {Never | Hourly | Daily {schedule time {0:00 |
1:00 | 2:00 | 3:00 | 4:00 | 5:00 | 6:00 | 7:00 | 8:00 |
9:00 | 10:00 | 11:00}} {schedule meridiem {AM | PM}} | Weekly
{schedule day {Sunday | Mond
ay | Tuesday | Wednesday |
Thursday | Friday | Saturday}} {schedule time {0:00 | 1:00 |
2:00 | 3:00 | 4:00 | 5:00 | 6:00 | 7:00 | 8:00 | 9:00 |
10:00 | 11:00}} {schedule meridiem {AM | PM}}}
syslog_server {ipaddress | domain name}
syslog_severity {LOG_EMERG | LOG_ALERT | LOG_CRITICAL |
LOG_ERROR | LOG_WARNING | LOG_NOTICE | LOG_INFO | LOG_DEBUG}
Mode system-config [logging-remote]
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
Log identifier
log_identifier identifier The log identifier (alphanumeric
string).
Email log configuration
email_logs_enable Y or N Enables or disables emailing of logs.
email_server ipaddress or domain name The IP address or domain name of
the SMTP server.
return_email email address The email address (alphanumeric
string) to which the SMTP server
replies are sent.
send_to_email email address The email address (alphanumeric
string) to which the logs and alerts
are sent.
smtp_custom_port number The port number of the SMTP server
for the outgoing email. The default
port number is 25.